Windows实现端口映射

一、Windows 下实现端口映射

1. 查询端口映射情况

netsh interface portproxy show v4tov4

2. 查询某一个 IP 的所有端口映射情况

netsh interface portproxy show v4tov4 | find "[IP]"

例：

netsh interface portproxy show v4tov4 | find "192.168.1.1"

3. 增加一个端口映射

netsh interface portproxy add v4tov4 listenaddress=[外网IP] listenport=[外网端口] connectaddress=[内网IP] connectport=[内网端口]

例：

netsh interface portproxy add v4tov4 listenaddress=2.2.2.2 listenport=8080 connectaddress=192.168.1.50 connectport=80

4. 删除一个端口映射

netsh interface portproxy delete v4tov4 listenaddress=[外网IP] listenport=[外网端口]

例：

netsh interface portproxy delete v4tov4 listenaddress=2.2.2.2 listenport=

二、Linux 下实现端口映射

1. 允许数据包转发

echo 1 >/proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -j MASQUERADE
iptables -A FORWARD -i [内网网卡名称] -j ACCEPT
iptables -t nat -A POSTROUTING -s [内网网段] -o [外网网卡名称] -j MASQUERADE

例：

echo 1 >/proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -j MASQUERADE
iptables -A FORWARD -i ens33 -j ACCEPT
iptables -t nat -A POSTROUTING -s 192.168.50.0/24 -o ens37 -j MASQUERADE

2. 设置端口映射

iptables -t nat -A PREROUTING -p tcp -m tcp --dport [外网端口] -j DNAT --to-destination [内网地址]:[内网端口]

例：

iptables -t nat -A PREROUTING -p tcp -m tcp --dport 6080 -j DNAT --to-de